MICROmatic VP10
GENERALITIES
- Zink-passivated metallic enclosure painted with epossidic dust paint, colour RAL 7035.
- Auxiliary transformer to separate power and auxiliary circuit parts (110V).
- Load-break switch with door interlock.
- Special contactors with damping resistors to limit capacitors inrush current (AC6b).
- FS17 450/750V self-extinguish cable according to EN 50525 – EN 50575 – EN 50575/A1.
- Microprocessor Power Factor Correction relay.
- CRM25 single phase self-healing metallized polypropylene capacitor vacuum impregnated with UN=400V rated voltage.
STANDARDS
Standards (bank) IEC 61439-1/2, IEC 61921
Standards (capacitors) IEC 60831-1/2
Summary
Ue = 400V
UN = 400V
UMAX = 440V
UN = 400V
UMAX = 440V
f = 50 Hz
THDIR% = ≤27%
THDIC% = ≤85%
THDIR% = ≤27%
THDIC% = ≤85%
| Part num. | Power [kvar] Ue=400V | Steps Ue=400V | Electrical steps number | LBS [A] | Icc [kA] | PFC relay | Weight [kg] | Dimensions [mm] | Data sheet |
|---|---|---|---|---|---|---|---|---|---|
| IC2VFF222050652 | 22 | 2-4-2x8 | 11 | 63 | 50 (Short-circuit withstand current conditioned by the upstream protective device) | 5LGA | 16 | WxDxH 610x260x480 (IP3X) |  techn. file |
| IC2VFF230050652 | 30 | 2-4-8-16 | 15 | 80 | 50 (Short-circuit withstand current conditioned by the upstream protective device) | 5LGA | 17 | WxDxH 610x260x480 (IP3X) | techn. file |
| IC2VFF236050652 | 36 | 4-2x8-16 | 9 | 100 | 50 (Short-circuit withstand current conditioned by the upstream protective device) | 5LGA | 22 | WxDxH 610x260x480 (IP3X) | techn. file |
